SATA AE1031H Bedienungsanleitung Seite 123

.Place the wheel on the turntable spindle and lower the lift by
operating the pedal (Fig. 16c).
.Making sure that the mobile pin is inserted in one of the fastening
bolt holes (see Fig. 16d).
.fit the cone on the handle, using the extension if necessary (see
table for using centring and clamping accessories in relation to
wheel type in this manual)
.fit the handle (a) in the centre hole and turn clockwise fully (Fig.
16e).
CRUSH HAZARD POINT.MOVING PARTS, Risk of crushing injury. Keep hands away from the handle or cone during clamping
See the section "TABLE FOR USING CENTRING AND CLAMPING ACCESSORIES ACCORD.ING TO RIM TYPE" in this manual.
.Operate the pedal
When working with easily damaged wheels (wheels with a central hole with thin, protrud.ing edges.see Fig. 17), we
recommend using the universal flange for blind rims, P/N
AE1031H
CAUTION!
to clamp the wheel.
中文
EN
CAUTION!
DE RU KO PT JA ES
123