Herunterladen Diese Seite drucken

Transport, Storage And Handling; Unpacking - SATA AE1031H Bedienungsanleitung

3d-allrad-locator

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 193
The tyre changer must be transported in its original packing and maintained in the position shown on the outer packing.
-Packing dimensions:
•width1150 mm
•depth1950 mm
•height2100 mm
-Weight of wooden packing:
Ambient conditions for machine transport and storage
Temperature: range from.25° ÷ +55°C.
Do not stack other goods on top of the packing or damage may result.
Handling
To move the packing, insert the tines of a fork-lift truck into the slots
on the base of the packing itself (pallet) (Fig.3).
Before moving the machine, refer to the HOISTING/ HANDLING section.
Keep the original packing in good conditions to be used if the equipment has to be shipped in the future.

2.1.UNPACKING

Remove the upper part of the packing and make sure the machine has not been damaged during transportation.
112
AE1031H

2.TRANSPORT, STORAGE AND HANDLING

Conditions for transporting the machine
CAUTION!
CAUTION!
中文
EN
DE
RU
KO
PT
JA
ES

Werbung

Fehlerbehebung

loading