Multi-Purpose Drawer; Required Computer Hardware & Software; Sound Emission; Location Of The Identification Plate & Serial Number - VHF Z4 Originalbetriebsanleitung

EN 12
4.6 Multi-purpose draw er
The multi-purpose drawer contains the cooling liquid
tank and up to 5 tool magazines. You can unlock the
multi-purpose drawer via the touchscreen and then
pull it out manually.
F . 7 M -
IG ULTI PURPOSE DRAWER
1. Machine serial number
2. Cooling liquid tank
3. Cover of the cooling liquid tank with strainer basket
4. Space for tool magazines
4.7 Required computer hardw are &
softw are
This machine is designed for an integrated CAD / CAM
workflow which allows you to manufacture restor-
ations with the following components:
The touchscreen of the machine
n
A machine internal CAM computer running
n
DENTALCAM & DENTALCNC ("manufacturing soft-
ware")
An external CAD computer
n
CAD application
*
not provided
*
You can use the touchscreen for standard operation
and basic maintenance.
If you do not use an integrated CAD / CAM workflow,
you will need to access Windows
computer during standard operation to directly work
with DENTALCAM & DENTALCNC.

4.8 Sound emission

The actual sound emission of the machine varies
heavily depending on the manufacturing material and
the machining conditions.
If the machine is exceptionally loud, check the fol-
lowing operating conditions:
Cleanliness of the blank holder
n
Condition of the tools
n
running a supported
*
on the CAM
®
Original Operating Instructions: Z4
Version: 12/15/2021
Quality of the blanks
n
If loud noise cannot be avoided, wear ear protection
during machining.
Sound measurement
Measuring conditions:
Processed material: IPS e.max (block, C14)
n
Tool status: new
n
Measured value: sound pressure level (distance:
n
1 m)
Measurement according to ISO 3746, survey
n
method 3
Established sound emission:
Operating condition
Processing
All other operating condi-
tions (tool change, move-
ment of the axes etc.)
4.9 Location of the identification
plate & serial number
The identification plate of the machine contains identi-
fying information such as the serial number. You can
find the identification plate and machine serial number
at the following location:

page 10
F . 8 S
IG ERIAL NUMBER ON THE IDENTIFICATION PLATE
Additionally you can find the machine serial number at
the following location: Multi-purpose drawer – see

above
Z4 – Machine overview
A-weighted A-weighted
sound pres- sound
sure level power level
81.8 dB(A) 92.3 dB(A)
<70 dB(A) –
Rear side of the machine – on
( )
MARKED ORANGE