Accessing The Cam Computer - VHF Z4 Originalbetriebsanleitung

EN 20

5.7.3 Accessing the CAM computer

Installing Microsoft
NOTICE
onto the CAM computer
violates the Windows License Agreements
®
The CAM computer runs Windows
If you install any version of Microsoft
CAM computer, you will violate the Windows
Agreement which may result in the following:
You may lose the right to use the pre-installed Win-
n
dows on the CAM computer. Without Windows
®
the machine will not work.
You may become subject to civil and criminal pro-
n
secution.
Never install any version of Microsoft
the CAM computer.
Once the machine is connected to the CAD computer
and the network connection is established, the CAM
computer can be accessed in 3 ways:
Access to
Access method CAM / CNC
Remote Desktop Yes
application on the
CAD computer
Connecting hardware Yes
to the machine
Windows Explorer on Yes
®
the CAD computer
Access via the Microsoft
n
ation allows you to use Windows
& DENTALCNC on the CAM computer without
additional hardware.
You can connect additional hardware to access the
n
CAM computer to use Windows
DENTALCNC
Accessing the DENTALCAM & DENTALCNC install-
n
ation folder via Windows
required for customer service.
If you do not use an integrated CAD / CAM workflow,
you will need to access Windows
computer during standard operation to directly work
with DENTALCAM & DENTALCNC.
Overview CAM computer access data
Following you find the access data for the internal CAM
computer as a quick reference.
Office
®
10 IoT Enterprise.
®
Office onto the
®
License
®
®
Office onto
®
Access to Win-
dows?
folder?
Yes
Yes
No
Remote Desktop applic-
®
/ DENTALCAM
®
/ DENTALCAM &
®
Explorer is usually only
®
on the CAM
®
Original Operating Instructions: Z4
Version: 12/15/2021
Computer name: Serial number of the machine
n
IP address: None specified, DHCP activated
n
Location of the identification plate & serial number – on
*

page 12
Administrator user with auto sign-in at Windows
startup:
User: camcomputer
n
Password: camcomputer
n
Standard user for accessing the DENTALCAM &
,
DENTALCNC installation folder, which is shared by
default:
User: cnctransfer
n
Password: cnctransfer
n
When you disconnect from the CAM computer,
never sign-out or shut down the CAM
computer. If you do, the machine will not be
operational until you restart it.
Z4 – Installing the machine
®
*