VHF Z4 Originalbetriebsanleitung Seite 22

EN 22
Accessing the CAM computer via hardware
You can directly connect a monitor and / or USB
devices to the CAM computer.
Use the ports of the CAM computer panel for this:
F . 13 CAM
IG COMPUTER PANEL
1. HDMI 1.4b port
2. USB 2.0 port with WiFi device
You can connect hardware to the internal CAM
computer as follows:
1. Connect the monitor to the HDMI connector of the
machine. If your monitor isn't equipped with an
HDMI cable, use an adapter.
Do not connect a laptop / tablet or similar
to the HDMI port; only connect a monitor
to the port.
2. If you want to install USB devices to the CAM com-
puter, do as follows:
a. Remove the WiFi device from the USB port.
b. (Optional) Connect a USB hub to the USB
port.
c. Connect the desired USB devices to the USB
port or USB hub.
You must reconnect the WiFi device to the
USB port after removing the other devices.
3. Activate the interface of the CAM computer with
the connected input device (e. g. mouse, key-
board, touch display).
4. Enter the following login credentials:
5. Press <E
Original Operating Instructions: Z4
Version: 12/15/2021
Z4 – Installing the machine
You are prompted to enter the login credentials.
User: camcomputer
n
Password: camcomputer
n
>.
NTER
The desktop of the CAM computer displays on the
connected display. You can access files and start
applications on the CAM computer.