VHF Z4 Originalbetriebsanleitung Seite 43

Z4 – Operation: Preparing jobs
1. To open the Tools section, select the
depicted icon.
The Tools section displays. One of the magazines is
selected and the corresponding information dis-
plays.
F . 42 T
IG OOLS SECTION
1. Color code of the currently selected tool magazine
2. Tool with expired tool life (red circle)
3. Tool life value indicator (blue outer circle)
4. Menu for selecting the tool magazine
5. Marking for the tool magazine currently inserted in the
working chamber
6. Marking for the tool magazine currently shown on the
touchscreen
2. Select the desired tool magazine from the menu at
the bottom display border.
The tools of the corresponding tool magazine dis-
play as circles.
a. In the middle of each circle, the tool match
code displays.
b. Tools with expired tool life values display in
red.
c. Each circle is assigned to a specific position of
the corresponding magazine.
F
IG
B
OTTOM
3. If tool life values have expired, remove the cor-
4. Insert the new tools:
Original Operating Instructions: Z4
Version: 12/15/2021
. 43 T : T 1 – 6
OP OOL POSITION IN THE TOOL MAGAZINE
: T 1 – 6
OOL POSITIONS ON THE TOUCHSCREEN
responding tools from the tool magazine.
a. Ensure that the positions of the tools in the
tool magazine match the tool positions on
the touchscreen.
b. Insert the tools straight into the tool positions
with the cutting edge pointing downwards.
Push them in until the ring touches the rub-
ber.
If the positions of the tools in the tool
magazine do not match the tool positions
on the touchscreen, the machine will use
the wrong tool(s) during job execution and
the job result will become unusable.
EN 43