Configuring The Cam Computer; Setting Up Dentalcnc; Checking The Data Transfer Folder Setting - VHF Z4 Originalbetriebsanleitung

Z4 – Installing the machine
Dental Wings Chairside CAD
This CAD application uses a designated shared data
folder on the CAM computer for sending jobs to the
machine. The folder is already created and shared at
delivery.
Folder path on the CAM computer:
C:\CADshare\DentalNestingObjToMDW
C: is the local hard drive on the CAD computer.
After integration, the CADshare folder will be accessible
from the CAD computer via a network drive.
Integration overview:
1. Download the integration script from the fol-
lowing internet address to the CAD computer:
https://www.dentalportal.info/community/filebase
2. Run the script on the CAD computer. Enter the
required information.
3. Store the path to the shared data folder on the
CAM computer in DENTALCNC.
4. Store the path to the shared data folder on the
CAD computer in Dental Wings Chairside CAD.
The integration in detail:
Configuring the CAD computer
1. Open an internet browser.
2. Enter the following address into the address bar:
https://www.dentalportal.info/community/filebase
3. Select Z4 from the Categories box on the right side.
4. Download the CAD/CAM integration script to the
CAD computer.
The script is stored on the CAD computer inside a
ZIP file.
5. Unpack the ZIP file (e.g. to the Desktop).
The script file is stored under the following name:
CAD-CAM_Integration_dental-wings.cmd
6. Run the script.
A window opens. The script prompts you to enter
the machine serial number.
7. Enter the machine serial number. Press <E
Location of the identification plate & serial number –

on page 12
The following happens:
a. A network drive is mapped to the shared data
folder on the CAM computer.
For this, the first available drive letter on the CAD
computer is used.
8. Record the drive letter for the network drive.
9. Press any key.

5.7.6 Configuring the CAM computer

1. Access the CAM computer.
2. Create the following folder:
3. Share this folder in your network. The CAD

5.7.7 Setting up DENTALCNC

5.7.8 Checking the data transfer folder set-
ting
1. Access the CAM computer.
2. Switch to DENTALCNC.
3. Open the DENTALCNC Application settings with the
4. Open the General settings with the following icon in
5. Check if the following folder path displays under
>.
NTER
Original Operating Instructions: Z4
Version: 12/15/2021
Example: If Z is the first available drive letter, you
will be able to access the shared data folder on
the CAM computer by opening the Z: drive on
the CAD computer.
b. The login credentials for the network share and
remote desktop access are stored on the CAD
computer.
The current window closes. The script has finished.
C:\CADshare\DentalNestingObjToMDW
computer requires read and write access to it.
following icon in the main icon bar:
the local icon bar:
the CAD/CAM integration: Data transfer folder label:
C:\CADshare\DentalNestingObjToMDW
F . 20 T
IG HE DATA TRANSFER FOLDER FOR
If it doesn't, do the following:
a. To store the data transfer folder in
DENTALCNC, select the depicted
icon to the right of the CAD/CAM
EN 29
CAD/CAM
INTEGRATION