Installing The Machine; Checking The Scope Of Delivery - VHF Z4 Originalbetriebsanleitung

EN 14
5 INSTALLING THE
MACHINE

5.1 Checking the scope of delivery

Unpack the machine and ensure that you have
received the following items:
1
4
8
12
16
2
5 6
9 10
13 14
17 18
Original Operating Instructions: Z4
1. 1 x Machine Z4
2. 1 x Cleaning brush
3. 5 x Tool magazine inserts
4. 1 x Power cable
5. 1 x Ethernet network cable (type: straight)
6. 1 x Spindle service set
7. 1 x Interdental brush (for cleaning the nozzle plate)
8. 1 x Blank holder service set
9. 1 x Tube of collet chuck grease (for spindle, blank holder,
tool magazine holder)
10. 5 x Tool magazines (in the drawer)
11. 1 x Measuring pin
12. 1 x Drill bit for tool positions (2.8 mm)
13. 1 x Calibration set: 1 micrometer, 5 blanks for man-
3
ufacturing test and calibration specimen
14. 1 x Microfiber cloth
15. 1 x View window wiper
16. 1 x Container with activated carbon pellets
17. 1 x Fine filter
18. 3 x Fixing screw for the collet chuck of the blank holder
19. 5 x Tool magazine caps
7
Not depicted:
This document
n
1 x Carrying aid for transporting the machine
n
1 x Transport lock in the working chamber
n
1 x Supplement about removing the carrying aid
n
and transport lock
11
1 x Transport protection cover in the multi-pur-
n
pose drawer
1 x Allen key for the tool magazine release screw
n
1 x Allen key for the holder of the view window
n
wiper
1 x Radius cutter for calibration (P200-R1-35)
n
3 x Bag with Tec Powder for cleaning the cooling
n
liquid system (50 g per bag)
15
Store the measuring pin and the calibration set safely
near the machine. Customer service will need them
for maintenance.
Keep the packaging of the machine, the carrying aid
and the transport lock for future transports.
19
Version: 12/15/2021
Z4 – Installing the machine