Working Chamber Door; Multi-Purpose Compartment - VHF R5 Originalbetriebsanleitung

R5 – Machine overview

4.3 Working chamber door

The working chamber door locks the working chamber
and protects the user from injuries during operation.
The working chamber door is operated by electricity.
You can open and close the door with DENTALCNC.
You cannot open the door when the machine is
switched off or while the axes are moving.
F . 3 W
IG ORKING CHAMBER DOOR

4.4 Multi-purpose compartment

The multi-purpose compartment contains the
following components:
You can open and close the multi-purpose compart-
ment via DENTALCNC .
F
IG
Original Operating Instructions: R5
Version: 12/16/2021
Cooling liquid tank
n
Blank magazine
n
Compressed air regulator
n
. 4 T -
HE OPEN MULTI PURPOSE COMPARTMENT
1. Blank magazine
2. Cooling liquid tank
3. Compressed air regulator
EN 11
( )
DISCS NOT INCLUDED