Touchscreen; Working Chamber Door; Working Chamber - VHF Z4 Originalbetriebsanleitung

Z4 – Machine overview

4.3 Touchscreen

The screen in the working chamber door of your
machine responds to touch. You can use it to operate
the machine by selecting icons on the user interface
and to receive information about jobs, tools and the
machine status.
F . 4 A
IG SECTION OF THE USER INTERFACE

4.4 Working chamber door

The working chamber door locks the working chamber
and protects the user from injuries during operation.
The working chamber door is operated by electricity.
You can open and close the door via the touchscreen
or with DENTALCNC. You cannot open the door when
the machine is switched off or while the axes are
moving.
F . 5 W
IG ORKING CHAMBER DOOR

4.5 Working chamber

You can mount blanks and insert tools into the working
chamber. This is where the blanks are processed.
F
IG
Colors of the working chamber lighting
The machine illuminates the working chamber in
different colors. The color will change depending on
the state of the machine. You will find the colors and
respective machine status in the following table:
White
Blue
Red
Original Operating Instructions: Z4
Version: 12/15/2021
. 6 W
ORKING CHAMBER
1. Bellow/Nozzle plate
2. Spindle with collet chuck for picking up tools
3. Blank holder (with collet chuck); Rotational axis A
4. Outlet for the cooling liquid
5. Tool magazine holder
6. Measuring key
7. Webcam
If the working chamber lighting is insufficient,
provide additional lighting.
Color
The machine is ready for operation.
You can open the working chamber door.
The machine is operating.
The working chamber door is locked.
A machine malfunction has occured.
The working chamber door is locked.
EN 11
Status