Starting The Machine With A Tool In The Collet Chuck - VHF Z4 Originalbetriebsanleitung

Z4 – Operation: Preparing jobs
F . 25 T CAM
IG HE INTERNAL COMPUTER IS CONNECTING TO THE
TOUCHSCREEN
b. After a few seconds, the connection is estab-
lished.
c. The machine references.
d. The working chamber is illuminated in white.
The machine will not reference if the
working chamber door is open.
5. If the working chamber door is open, confirm the
respective dialog on the touchscreen to close the
door.
After the machine has referenced, the Home section
displays on the touchscreen.
F . 26 T
IG HE TOUCHSCREEN AFTER REFERENCING
If the touchscreen displays that there is a tool in the
collet chuck which needs to be removed:
machine with a tool in the collet chuck – see below
6.2 Starting the machine w ith a tool
in the collet chuck
Under some circumstances like a power outage, there
can be a tool in the collet chuck of the spindle when
you start the machine. You need to remove the tool
from the collet chuck before you can use the machine.
your bare hands
If you handle tools on the cutting surface, you may be
injured. As the tool may be very hot, you may also
suffer from skin burns.
If the tool remains in the spindle after you have
confirmed the message, it will collide with machine
parts such as the measuring key and severely damage
them.
1. Start the machine.
2. CAUTION!Wear gloves.
3. Hold the tool in the collet chuck in place.
4. Confirm the current message.
5. Remove the tool from the collet chuck.
Starting the

6. Confirm the current message.
Original Operating Instructions: Z4
Version: 12/15/2021
Danger of cuts and burns
CAUTION
when touching tools with
Only touch tools at their shank.
When handling tools, wear protective gloves.
Machine damage if you do not
NOTICE
remove the tool
Always follow the instructions below when you start
the machine with a tool in the collet chuck.
The touchscreen displays that there is a tool in the
collet chuck. The working chamber door opens.
The following happens:
a. The collet chuck opens.
b. The current dialog window closes.
c. A dialog window opens.
F . 27 R
IG EMOVING THE TOOL FROM THE COLLET CHUCK
EN 33