Cad Computer & Network Integration - VHF Z4 Originalbetriebsanleitung

EN 18
More information on tool magazines and
managing tools:
Managing tools – on page 42

5.7 CAD computer & netw ork integ-
ration
The CAD / CAM integration workflow is as follows:
1. Prepare the machine and the CAD computer
( )
page 19

2. Access the CAM computer (
3. (Optional) Set up WiFi access for the machine
( page 23 )

4. Integrate the CAD and CAM/CNC software
( )
page 24

Danger caused by default
NOTICE
passwords and network
intrusions
The default passwords mentioned in this public docu-
ment allow everyone to access the corresponding
devices via the network and / or the internet. This can
lead to data theft, data corruption and damaging of
the machine and other devices.
Have the network integration of the machine and
other connected devices carried out by a qualified
network and IT specialist.
Have the specialist change the default passwords
after installation and secure your network against
intrusion. Ensure that passwords are recorded and
handed to you.
page 20 )

Original Operating Instructions: Z4
Version: 12/15/2021
Z4 – Installing the machine
Machine damage and security
NOTICE
breaches in case of improper
handling of software updates
The automatic Windows update function on the
®
internal CAM computer is deactivated. This is required
for proper machine operation, but can pose a security
risk if you do not manually check for updates.
Ensure that the internal CAM computer of the
machine has access to the Internet. If required, con-
figure your network firewall accordingly.
Check if software updates are available in the main-
tenance section of the touchscreen once per week.
Updating the software and firmware – on page 70

Always install software updates as soon as they
become available.
Never activate the automatic Windows
tion on the internal CAM computer. This can lead to
aborted jobs, damaged tools and blanks and a
defective CAM computer. It may also lead to mech-
anical machine damage.
Ensure that Windows Group Policies do not over-
®
ride any software update settings on the internal
CAM computer.
Do not install any software such as anti malware soft-
ware which may block network traffic.
For integrating the machine into your network, you
will require the assistance of your IT specialist.
Ensure that your network is working without disrup-
tions. Network failures will lead to aborted jobs and
unusable machining results. WiFi connections are
not as reliable as wired networks.
Do not contact customer support for setting up your
network or troubleshooting network issues.
Customer service will only help you with machine-
related issues.
For the initial installation, an Ethernet cable is
required even if you want to operate the machine
via a WiFi connection.
Ensure that the user camcomputer is automatically
signed-in at Windows startup. Otherwise, the
®
machine will not be operational. You must re-enable
the automatic sign-in when you change the pass-
word for this user.
Ensure that the user camcomputer has administrator
privileges. Otherwise, the machine will not be oper-
ational.
Be aware that changing the passwords for the pre-
defined user accounts may require a reconfiguration
of the machine's network connection and the
CAD/CAM integration.
update func-
®