Configuring The Cad Computer; Setting Up Dental Wings Chairside Cad - VHF Z4 Originalbetriebsanleitung

EN 30
integration: Data transfer folder label.
A window for selecting the folder opens.
b. From the drop-down list, select the drive let-
ter c:.
c. Select the following folder:
CADshare\DentalNestingObjToMDW
d. Select the depicted icon.
The selected folder displays below the
CAD/CAM integration: Data transfer folder
label.

5.7.9 Configuring the CAD computer

1. Access the CAD computer.
2. Install exocad ChairsideCAD.
3. Map a network drive to the C:\CADshare\Dent-
alNestingObjToMDW folder that you created on the
CAM computer.
Record the drive letter.
n
Enter the exact folder path including the
n
leading backslashes \\.
Enter the login credentials for your CAM
n
computer.
Store these login credentials on the CAD
computer.
Activate the Reconnect at sign-in option.
n
5.7.10 Setting up Dental Wings Chairside
CAD
1. On the CAD computer, open Dental Wings Chair-
side CAD.
2. Open the settings by selecting the depic-
ted icon in the left column.
3. Select Preferences.
F
IG
4. Open the Milling menu.
5. Enter the network path to the shared data folder
F
IG
CAD
6. Save your changes.
Original Operating Instructions: Z4
Version: 12/15/2021
Z4 – Installing the machine
. 21 O D
PENING THE SETTINGS IN ENTAL
into the VHF Z4 Output directory input field.
a. Select [...].
b. Access the mapped network drive by select-
ing the drive letter that you recorded.
c. On the network drive, select the following
folder:
DentalNestingObjToMDW
Example: If Z is the network drive letter, the
network path is:
Z:\DentalNestingObjToMDW
. 22 S
PECIFYING THE OUTPUT PATH IN
From now on, Dental Wings Chairside CAD auto-
matically suggests exporting dental objects into the
specified folder.
W C CAD
INGS HAIRSIDE
D W C
ENTAL INGS HAIRSIDE