VHF Z4 Originalbetriebsanleitung Seite 26

EN 26
The Z4 is now listed in the Installed machines sec-
tion.
15. In the line for the Z4, select [Test].
The following happens:
a. A window opens.
b. TRIOS Design Studio runs several tests.
c. If the CAD/CAM integration is successful, green
check marks display at the end of every line.
16. Save your changes in TRIOS Design Studio. Restart
the application.
Original Operating Instructions: Z4
Version: 12/15/2021
Z4 – Installing the machine