Product Description - 3M 9661L Bedienungsanleitung

3M™ Surgical Clipper 9661L with Pivoting Head

Product Description

The 3M™ Surgical Clipper 9661L with Pivoting Head, is a cordless,
rechargeable, battery-operated clipper which is comprised of a
clipper body, drop-in charger stand with cord (REF9662L) * and
a single-use blade assembly (REF9660 and REF9690). *9663L,
9665L and 9668L: additional drop-in charger stands with cord.
Please report a serious incident that has occurred in relation to the
device to 3M and the local competent authority.
Indications for Use
The 3M™ Surgical Clipper 9661L with Pivoting Head is intended
to remove wet or dry body and head hair from any patient by a
health care professional in preparation for any medical procedure
requiring hair removal. It is intended for use in a hospital, clinic,
ambulatory surgery center or other medical facilities. It is not
intended for home use. Not tested for use in mobile emergency
medical services (EMS) environments. The clipper has been
designed and tested for use only with the series of drop-in charger
stands with cord (9662L, 9663L, 9665L, and 9668L), and blade
assemblies 9660 and 9690.
Warnings
WARNING: Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Warning- To reduce the risks associated with fire and explosion
which if not avoided could result in death or serious injury and/
or property damage:
• Do not operate clipper where aerosol (spray) products,
flammable anesthetic mixture with air, nitrous oxide
or oxygen administering equipment other than those
administered via nasal cannulas or masks are being used.
• Do not use clipper on a patient whose clothing is saturated
with flammable solutions such as gasoline, fuel oil,
solvents, etc.
• Avoid using around alcohol or similar flammable cleaning
solutions. If alcohol is used to clean the clipper, ensure
that the clipper and surrounding area is ventilated of fumes
before plugging in the drop-in charger stand with cord or
switching on the clipper.
• Modification of this unit by anyone other than 3M or
affixation of any accessory not manufactured by 3M or use
of the surgical clipper with current or voltage other than that
specified in this instructional insert is PROHIBITED.
Warning- To reduce the risks associated with hazardous voltage
which if not avoided could result in death or serious injury:
• The MAINS ISOLATION DEVICE for this product is the
electrical plug.
• Do not attempt to plug or unplug the drop-in charger stand
with cord from an electrical outlet with wet hands.
• Unplug the drop-in charger stand with cord before cleaning.
• Do not place or store a drop-in charger stand with cord
where it can fall or be pulled into a tub or sink.
• Never use the drop-in charger stand with cord if it has a
damaged cord or plug, is not working properly, has been
dropped or damaged, or has been dropped into water.
• Do not put surgical clipper in fire or mutilate the
battery pack during disposal as it may burst or release
toxic materials.
• Risk of fire and burns. Do not open, crush, heat above
(60°C) or incinerate.
• Do not short circuit the battery pack by bridging the
battery contacts with a metal or conductive part as it may
cause burns.
• Do not attempt to replace the battery pack. This could result
in the risk of fire or electric shock.
• Do not charge near water.
Warning- To reduce the risks associated with cross
contamination, which if not avoided, could result in death or
serious injury:
• Do not reuse the blade assembly. Single patient use only.
• Always clean and disinfect the clipper body
between patients.
Cautions
CAUTION: Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Caution- To reduce the risks associated with fire and hazardous
voltage which if not avoided may result in moderate or minor
injury and/or property damage:
• Clipper contains a Lithium-ion battery
• Do not sterilize the clipper body, drop-in charger stand with
cord, or blade assembly.
• Only use attachments recommended by the manufacturer.
• Always store the clipper and drop-in charger stand with
cord in a moisture-free area.
• Do not charge in a closed closet or cabinet.
• Do not charge the clipper outdoors.
• Keep drop-in charger stand with cord away from
heated surfaces.
• See rating plate on the wall plug housing of drop-in charger
stand with cord for proper wall outlet voltage. Rating plate
must be viewed from a distance of 18 inches (0.46 meters)
or less.
• This device may cause (EMI) Electromagnetic Interference.
If this occurs, separate product from affected device at
a distance of at least 30 cm (12 inches) to any part of the
9661L, including cables specified by the manufacturer.
• Mobile RF communications equipment can affect medical
electrical equipment
• The use of accessories other than those specified may result
in increased emissions or decreased immunity of the clipper.
• Do not submerse the clipper in water deeper than 1 meter
(3.3 ft). Do not submerse for longer than 30 minutes.
• Do not dismantle the clipper during the useful life of the
clipper for this can affect the watertight construction of
the clipper.
Caution- To reduce the risk associated with environmental
contamination, which if not avoided, may result in minor or
moderate injury:
1
a