Bosch EPS 118 Originalbetriebsanleitung Seite 64

en 64 | EPS 118 | Product description
5.4.10 Adapter cables
Adapter cable 1 684 463 952 (Bosch CRI/piezo CRI)
For actuation of CRIs / piezo CRIs using connection X7
of the EPS 118 (Fig. 3, item 10).
458900-17_Pal
Fig. 11: Adapter cable 1 684 463 952
Adapter cable 1 684 463 953 (Bosch CRIN)
For actuation of CRINs using connection X7 of the
EPS 118 (Fig. 3, item 10).
458900-16_Pal
Fig. 12: Adapter cable 1 684 463 953
5.4.11 Sealing plug 1 683 080 012
The sealing plug included in the scope of delivery is
required for performing the leak check. The sealing
plug has a M12 thread and is screwed onto the con-
nection adapter for the CRI/CRIN and piezo CRI (see
sec. 5.4.7). Tightening torque: 30 Nm
458900-15_Pal
Fig. 13: Sealing plug 1 683 080 012
i
The leak test can be called up under "Options >>
Settings >> EPS 118 >> Leak test". Further informa-
tion (see section 8.2.2).
5.4.12 Protective hood
CRI/CRIN and piezo CRI testing can only be performed
with the protective hood closed. If the protective hood
is opened during the test, it is terminated. The test
must be restarted.
|
1 689 989 300 2018-05-24
5.4.13 Non-Bosch CRI accessory set 1 687 010 594
(optional accessories)
Accessory set 1 687 010 594 contains all the accesso-
ries used for connecting and testing non-Bosch CRIs
(VDO/Continental/Siemens, Denso and Delphi) to the
EPS 118.
i
The following accessories are not included in the
scope of delivery of the EPS 118.
Hose assembly 1 684 462 571
The hose assembly 1 684 462 571 connects the VDO/
Continental/Siemens/Denso piezo CRI test oil return to
the return quantity test connection (Fig. 3, item 3).
Fig. 14: Hose assembly 1 684 462 571
Adapter cable 1 684 463 618 (Denso CRI / piezo CRI)
For actuation of Denso CRIs / piezo CRIs using connec-
tion X7 of the EPS 118 (Fig. 3, item 10).
1 684 463 618
Piezo
FD: MM/YYYY
Denso Injector
Fig. 15: Adapter cable 1 684 463 618
Connection cable 1 684 448 333
For actuation of third-party CRIs using connection X7
of the EPS 118 (Fig. 3, item 10). The injector-specific
adapter cable is also needed to connect to the
CRI / piezo CRI.
458900-18_Pal
Fig. 16: Connection cable 1 684 448 333
458900-04_Pal
458900-32_Pal
Robert Bosch GmbH