Medtronic ProstivaRF Therapy 8930 Bedienungsanleitung Seite 73

8930EN_4.fm 12/17/10 2:44 pm
UCxxxxxx EN
7 x 9 inches (178 mm x 229 mm)
MA07445A008 Rev X
Table 4-4. Prostiva RF Therapy Procedure: Basic Steps
To
1. Connect the AC power
cord to the radio
frequency generator.
2. Turn the radio frequency
generator power on.
3. Attach the return
electrode to the patient.
4. Connect the return
electrode cable to the
radio frequency
generator therapy panel.
5. Connect the tubing
system between the
hand piece and an
irrigation source.
6. Attach the telescope to
the hand piece.
7. Set the hand piece
needle-length selector
dial to the appropriate
value.
Prostiva RF Therapy Procedure
Patient Treatment
Do This
Check that the power switch is off.
Next, attach the radio frequency
generator's AC power cord to the
back panel power input connector.
Then, plug the power cord into an
appropriate AC outlet.
Set the power switch to the on
position. Check that the display lights
up and shows the startup screen.
Open and remove the backing from
the return electrode. Next, securely
attach the return electrode to the
patient's lower back.
Pass the return electrode out of the
patient treatment field for connection
to the radio frequency generator.
Use a sterile technique to open the
hand piece and tubing system
packages. Attach the tubing system to
the hand piece stopcock and the
irrigation source. Optionally, connect
to an aspirating syringe.
With the telescope lock down, insert
the sterile telescope into the hand
piece. Slide the telescope lock up to
secure the telescope in place.
Connect the light source cable to the
telescope.
Based on your patient's prostate size
and transverse measurement and
your medical judgement, use the
needle length formula (Figure 4-2) to
determine the appropriate needle
length selection.
2010-12 8930 System User Guide English
Medtronic Confidential
CRMRef_R06
73