Completing Power-On Sequence - Medtronic ProstivaRF Therapy 8930 Bedienungsanleitung

8930EN_3.fm 12/17/10 2:43 pm
UCxxxxxx EN
7 x 9 inches (178 mm x 229 mm)
Chapter 3
56
Getting Started

Completing Power-On Sequence

English 8930 System User Guide 2010-12
MA07445A008 Rev X
The power cable connector and power switch for the Model 8930
RF Generator are located on the back side of the device
(Figure 3-2). The power switch toggles the AC power on or off.
1. Securely attach the Model 8930 power cable to the AC power
connector.
2. Check that the power switch is in the off position before
plugging in the power cable to an appropriate AC power
outlet.
3. When the RF Generator is ready to apply power, press the
power switch on.
Press switch here
for AC Power off
With plug end
unplugged, securely
connect cable here.
Place cable into AC
power outlet.
Figure 3-2. Complete Power-On Sequence.
Medtronic Confidential
CRMRef_R06
Press switch here
for AC Power on