universal robots UR8 Long PolyScope X Benutzerhandbuch Seite 219

18. Erklärungen und Zertifizierungen
EU Declaration of Incorporation (DOI)
Manufacturer:
Universal Robots A/S
Energivej 51, DK-5260 Odense S DK
Description and Identification of the Partly-Completed Machine(s):
Product and
Function:
Model:
Serial Number: Starting
Incorporation:
It is declared that the above products fulfil, for what is supplied, the following directives as detailed below:
When this partly completed machine is integrated and becomes a complete machine, the integrator is responsible for the
completed machine fulfiling all applicable Directives, applying the CE mark and providing the Declaration of Conformity (DOC).
I. Machinery Directive 2006/42/EC
II. Low-voltage Directive 2014/35/EU
III. EMC Directive 2014/30/EU
Reference to the harmonized standards used, as referred to in Article 7(2) of the MD & LV Directives and Article
6 of the EMC Directive:
(I) EN ISO 10218-1:2011
(I) EN ISO 12100:2010
(I) EN ISO 13849-1:2015
2023 edition has no relevant changes
(I) EN ISO 13849-2:2012
Ж See TÜV Rheinland Certificates
Reference to other technical standards and technical specifications used:
(I) ISO 9409-1:2004
(I) ISO/TS 15066:2016
(III) EN 60068-2-1:2007
(III) EN 60068-2-2:2007
The manufacturer, or his authorised representative, shall transmit relevant information about the partly completed
machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system by the notified body Bureau Veritas: ISO 9001 certificate #DK019348,
ISO 14001 certificate DK019349, and ISO 45001 certificate #DK019350.
Odense Denmark, 25 August 2025
This DOI can change without notice. DOIs are in User Manuals. Most recent User Manuals & DOIs are available from the UR website.
Universal Robots A/S, Energivej 51, DK-5260 Odense S, Denmark
CVR-nr. 29 13 80 60
Benutzerhandbuch
(in accordance with 2006/42/EC Annex II B)
Person in the Community Authorized to Compile the Technical File:
David Brandt, Technology Officer, Compliance
Universal Robots A/S, Energivej 25, DK-5260 Odense S Denmark
Industrial robot multi-purpose multi-axis manipulator with standard control box, standard length cables &
with or without UR 3PE teach pendant. Function is determined by the completed machine (robot
application or cell with end-effector, intended use and application program).
UR8Long, UR15, UR18, UR20, UR30 with a standard control box:
2024 6 8 00252 and higher for the
Sequential numbering, restarting at 0 each year
year
series
6 =UR8Long, 7 = UR15, 5 = UR18, 8 = UR20, 9 = UR30
*
TÜV Rheinland certifications: UR20:11 Mar '24 (#00252). UR30: 14 Mar '24. UR15: May '25.
UR8Long (#00019) & UR18 (#00012): 31 Jul '25
Universal Robots UR8Long, UR15, UR18, UR20 & UR30 shall only be put into service upon being
integrated into a final complete machine (robot application or robot cell), which conforms with the
provisions of the Machinery Directive and other applicable Directives.
The following essential requirements have been fulfilled:
1.1.6, 1.2.1, 1.2.4.3, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.4, 1.3.8.1, 1.3.9, 1.4.1 with 3PE TP,
1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.10, 1.6.3, 1.7.1.1, 1.7.2, 1.7.4, 1.7.4.1,
1.7.4.2, 4.1.2.1, 4.1.2.3, 4.1.2.5 (sling), 4.1.3, 4.3.3, Annex VI.
It is declared that the relevant technical documentation has been compiled
in accordance with Part B of Annex VII of the Machinery Directive.
Reference the LVD and the harmonized standards used below.
Reference the EMC Directive and the harmonized standards used below.
Ж
(I) EN ISO 13732-1:2008
(I) EN ISO 13850:2015
Ж
(I) EN IEC 60204-1:2018
(I, II) EN 60947-5-5:1997+A1:2005
+A11:2013+A2:2017
(III) EN 60068-2-27:2009
(III) EN 60068-2-64:2008+A1:2019
as applicable
(II) EN IEC 60320-1:2021
(II) EN 60529:1991/AC:2016
UR20*
(I) EN IEC 60947-5-8:2014 & 2021
(III) EN IEC 61000-3-2:2014 & 2019
(III) EN 61000-3-3:2013
as applicable
(III) EN 61000-6-2: 2012 & 2019
(II) EN 61140:2002/A1:2006
(II) EN 60664-1:2007
(III) EN IEC 61000-6-4:2023
(II) EN IEC 61784-3:2021 [SIL2]
(III) EN 61326-3-1:2017
Roberta Nelson Shea, Global Technical Compliance Officer
222
original: EN
NOTE: This DOI is NOT applicable
when the OEM Controller is used.
See control box markings.
1.1.2, 1.1.3, 1.1.5,
& 2016
[Industrial locations SIL 2]
www.universal-robots.com
UR8 Long PolyScope X