Rear Wheel - MOTO GUZZI V11 SPORT Werkstatt-Handbuch

A
B
C
D
E
F
B
F
G
E
H
I
L
M
N
O
Tightening torque 28÷30 Nm
Anzugsmoment 28÷30 Nm
Aandraaimoment 28÷30 Nm
P
8
D
QQQ
QQQ
QQQ
2

REAR WHEEL

Removal:
• Place a stand under the swing arm "A" so that the rear
wheel is raised from the ground;
• Unscrew and remove the wheel spindle nut "B" on the
swing arm, brake caliper side;
• Unscrew spindle "C" from the opposite side, paying
attention to the caliper holding plate "E" which, if
B
unfastenend, could fall and get damaged;
• Completely remove the wheel spindle from the swing
A
arm and from the transmission box "D";
• Remove the rear wheel.
N.B.
Make sure that the shim " F" does not get detached
from the transmission box during disassembly.
C
IMPORTANT
Position the rear transmission box so that its
weight does not stress the joints on the angular
end-of-stroke position, as this could damage them.
QQQ
QQQ
QQQ
Tightening torque 28÷30 Nm
Anzugsmoment 28÷30 Nm
Aandraaimoment 28÷30 Nm
W
HEEL PARTS