MOTO GUZZI V11 SPORT Werkstatt-Handbuch Seite 400

A
B
C
D
E
F
G
C
H
I
L
M
N
O
P
26
A
B
A
B
C
C
ONTROLS
RH
SIDE
Removal:
• Remove the accelerator control as described in chapter
4 section G;
• Remove the saddle as described in chapter 4 section
E;
• Remove the tank as illustrated in chapter 3 sect. I;
• Detach the RH control cable from the main connector
"A";
• Remove the cable from the chassis by cutting all the
clamps fastening it;
• detach the two connectors "B" from the micro-switch;
• Unscrew the two fastening screws "C" and remove the
two parts of the control unit from the half-handlebar.
Refitting:
Follow the removal procedure in reverse order and fasten
the cable onto the chassis using new clamps.
LH
SIDE
Removal:
• Remove the saddle as described in chapter 4 section
E;
• Remove the tank as illustrated in chapter 3 sect. I;
• Disconnect the LH control cable from the main
connector "A"
• Release the cable from any eventual clamps;
• Detach the handgrip from the half-handlebar "B";
• Unscrew the two screws "C" fastening it to the half-
handlebar and remove the control assembly set;
Refitting:
Follow the removal procedure in reverse order.
E
LECTRICAL
S
YSTEM