MOTO GUZZI V11 SPORT Werkstatt-Handbuch Seite 90

A
B
C
D
E
F
G
H
I
L
M
N
O
P
30
F :
ILLING
• Refit the rod in reverse sequence with respect to the
disassembly; remember not to screw down the cap;
• Lock the rod in a vice;
• Push the sleeve downwards, until it reaches the lower
strut;
• Use a hand to keep the cartridge slightly raised and fill
the fork with 400 cc of new oil;
• Gently move the car tridge shaft upwards and
downwards, so that the inside fills with oil. Continue
until, lifting it upwards, an even resistance is noticeable
along all the stroke. At this point the cartridge will be
drained.
• Screw down the cap once again: first on the tube and
then on the external sleeve
S
CHEDULED
M
AINTENANCE