Exhaust Pipes - MOTO GUZZI V11 SPORT Werkstatt-Handbuch

A
B
C
D
E
F
RING NUT 2° SERIE
G
NUTMUTTER 2. SERIE
BESLAGRING 2° SERIE
H
I
L
M
N
O
P
4
B
C
A
D
B
3

EXHAUST PIPES

A
Disassembly:
• Unscrew the 2 nuts "A" with the ring-nut fastening
washer "B" on the heads;
• Remove the ring-nut "B"
• Remove the 2 half-bushings and the gasket positioned
between the manifold and the exhaust pipe.
• Loosen the clamp "C" on the connection between the
exhaust pipes and the expansion chamber;
• Remove the exhaust pipe "D".
N.B.
Except for a small initial series, the motorbikes
are equipped with the 2nd series' fastening,
illustrated in the figure.
WARNING
Plug the exhaust ducts on the head to avoid
foreign bodies getting into the combustion
chamber.
Reassembly:
• Fit the exhaust pipe into the respective insertion seat
on the expansion chamber;
• Fit the two half-bushings and the gasket between the
manifold and the exhaust;
• Position the ring-nut "B" in its position and tighten the
2 nuts with washer to the prescribed torque;
• Tighten the clamp "C" for connection to the expansion
chamber.
E S
XHAUST YSTEM