MOTO GUZZI V11 SPORT Werkstatt-Handbuch Seite 154

A
B
C
D
E
F
G
H
I
L
M
N
O
P
D
B
A
34
F
G
E F
• Remove the washer "E";
• Taking care not to damage the sleeve, use a screwdriver
to extract the copper bushing "F";
• Remove the sleeve from the vice and hammer it on a
soft surface, as illustrated in the figure, until the shim
E
"G" and the other bushing "H" are extracted.
N.B.
The two copper bushings "F" and "H" are
identical.
• Check all the components removed from inside the
sleeve, in particular the gasket and the dust-scraper
ring, as these ensure tightness; if some of these
components are damaged, replace them.
H
W
HEEL PARTS