MOTO GUZZI V11 SPORT Werkstatt-Handbuch Seite 88

A
B
I
H
C
D
L
E
F
G
H
I
L
M
N
O
P
28
• Remove the washer "F" and the pre-load pipe "G";
• Remove the spring "H" and its support washer "I";
• To drain all the oil contained in the tube, pump several
• Lock the tube as illustrated in the figure;
• Unscrew the cartridge fastening screw "L" and support
• Detach the cartridge "M";
• Pump several times using the cartridge, in order to
G
F E
• Thoroughly check all the rod's components and make
M
times;
the cartridge at the same time, as illustrated in the
figure;
completely drain the oil;
sure than none of them is damaged. If there are no
particular damages or wear, reassemble the rod. If this
is not the case, replace the damaged components.
S M
CHEDULED AINTENANCE