MOTO GUZZI V11 SPORT Werkstatt-Handbuch Seite 312

A
B
C
D
E
F
G
H
I
L
M
N
O
P
54
Kg11,7
(øm 16,3)
ø13,8
C
HECK OF COMPONENTS
± 0,45
Clutch springs
± 0,55
Kg15,3
Check that the springs have not lost their elasticity and
are not deformed:
• Springs compressed to 22 mm must give a load of
11.25 ÷ 11.70 Kg ;
• Springs compressed to 20 mm must give a load of
14.75 ÷ 15.30 Kg.
Spring pressure plate
Check that the disk hole, where the control retainer
operates, does not show signs of wear, and that the resting
surfaces for the driven disk are perfectly flat.
Check that the toothing inside the fly wheel is in perfect
condition.
Driven disks
Check that the coupling surfaces with the driven disks
are completely smooth and flat and that the external
toothing which works inside the flywheel is not ruined,
otherwise replace the disk.
Toothed crown for ignition
Check that the coupling surface with the driven disk is
perfectly smooth and flat.
Also check that the toothing, where the starter motor pinon
works, is not ginned or damaged, otherwise replace it.
Clutch internal body
Check that the teeth do not show signs of impression in
the area in contact with the disks.
E
NGINE