MOTO GUZZI V11 SPORT Werkstatt-Handbuch Seite 112

A
B
C
D
E
F
G
H
I
L
M
N
O
P
4
A
C
B
D
C
D
B
2 FRONT AND REAR MUD GUARDS
F
RONT MUD GUARD
The front mud guard is made up of two parts.
The rear part of the mud guard is fastened to the front
part with screws.
Removing the mud guard rear part:
• Unscrew the 3 upper screws "A" using an Allen key;
• Unscrew the 2 side screws "B";
• Unscrew the two side screws"C" fastening the caliper
supports;
• Remove the mud guard rear part.
Removing the mud guard front part:
• Unscrew the 4 screws "D", two per side, which fasten
the mud guard to the fork stems;
• Remove the front part of the mud guard.
Reassembly:
Refit the front mud guard following the instructions
described below, but in reverse order.
R
EAR MUD GUARD
Removal:
• Unscrew the 4 side screws "A" and the two rear screws
"B";
• Remove the rear mud guard "C" and the two rear covers
"D"
Reassembly:
Carry out the assembly procedures in reverse order.
A
T
RIMMINGS