Werbung
5 Using the robotic mower in a team
► Press and hold LOCK (3) until the light
strip (2) completely lights up white.
The device lock of the robotic mower is deacti‐
vated.
► Press the displayed key combination.
The LED (4) on the docking station (team 3)
flashes white.
Team 3 is set up. The robotic mower is ready to
mow.
Setting up team 2
Set up the team function for team 2 as described
for team 3.
► Push the robotic mower (team 2) into the mas‐
ter docking station (team 1) as far as it will go.
► Press and hold HOME until the light strip com‐
pletely lights up yellow.
The team configuration is active, and the light
strip lights up yellow from left to right.
► Remove the robotic mower (team 2) from the
master docking station and push it into the tar‐
get station (team 2) as far as it will go.
► Press HOME.
The target station is confirmed.
► Press and hold LOCK until the light strip com‐
pletely lights up white
0458-036-9801-A
3
2
4
The device lock of the robotic mower is deacti‐
vated.
► Press the displayed key combination.
The LED on the docking station (team 2)
flashes white.
Setting up team 1
Set up the team function for team 1 as described
for team 3 and team 2.
► Push the robotic mower (team 1) into the mas‐
ter docking station (team 1) as far as it will go.
► Press and hold HOME until the light strip com‐
pletely lights up yellow.
The team configuration is active, and the light
strip lights up yellow from left to right.
2.
1.
► Remove the robotic mower (team 1) from the
master docking station (team 1) and push it
again into the master docking station as far as
it will go.
► Press HOME.
The target station is confirmed.
► Press and hold LOCK until the light strip com‐
pletely lights up white
The device lock of the robotic mower is deacti‐
vated.
► Press the displayed key combination.
The LED on the docking station (team 1)
flashes white.
Completing the team set-up
Enter settings of the robotic mowers only after
completing the team set-up. Use the MY iMOW
app or the STIHL connected Portal.
The most important settings for the team function
are:
– Establishing the same cutting height for all
robotic mowers
– Creating a mowing plan and establishing a
time zone
– Setting the rain sensor
– Defining the starting distance
The PIN protection on the robotic mower must be
deactivated in order to define the starting dis‐
tance.
English
®
87
Werbung
