Werbung
English
9
Operating and Adjusting
the Robot Mower
9.1
Control panel
1
Use the pushbuttons (1 to 4) to operate the
robotic mower's basic functions. The full scope of
functions is available in the MY iMOW
Starting the Mowing Process
► Press START (3).
The robot mower starts mowing and later
automatically returns to the docking station.
Stopping the mowing process and locking the
robot mower
► Press STOP (1).
The robot mower and the mowing unit stop.
The robot mower is locked.
Sending the robot mower to the docking station
► Press HOME (4).
The robot mower returns to the docking sta‐
tion.
Unlocking the robot mower
► Press LOCK (2).
► Press the displayed key combination.
Accessing information
► Press LOCK (2).
The robotic mower plays back audible infor‐
mation about the current status.
9.2
The MY iMOW
®
The MY iMOW
app is necessary for convenient
use of the robotic mower. The robotic mower can
be operated and configured via the MY iMOW
app.
The robotic mower can be connected to a mobile
device via a wireless network connection
(WLAN) and mobile phone connection or Blue‐
®
tooth
. The robotic mower can be operated and
configured from a desktop computer using the
®
MY iMOW
web app.
112
4
3
2
®
app.
app
®
®
9 Operating and Adjusting the Robot Mower
Main functions
– Starting and stopping the mowing process
– Mowing plan
– Configuring mowing times (with an assistant
or manually)
– Configuring starting points (optional)
– Selecting zones (optional)
– Setting the cutting height
– Device access
– Setting up PIN protection
– Setting home area
– Setting alarm
– Switching on edge optimization
– Performing a wire signal check
– Switching on ambient animation
– Switching on "Check blades" reminder
– Remote access to the robotic mower via a
wireless network connection (WLAN)
– Remote access to the robotic mower via a
mobile phone connection
– Support
Using the robotic mowers as a team
The following settings on the robotic mowers
must be made for team operation:
– Establishing cutting height
– Creating a mowing plan and establishing a
time zone
– Setting the rain sensor
– Defining the starting distance
The settings for the mowing plan, cutting height
and time zone must be identical for all robotic
mowers in the team. The settings for all robotic
mowers must be made individually.
The following settings are limited in the team
function in the MY iMOW
– Wire signal test (only possible with the robotic
mower that is connected to the master docking
station (team 1))
The following settings are not available in the
team function in the MY iMOW
– Select zones
– Set starting points
Information for integration into your home area
network
To increase data security, you can integrate the
®
iMOW
separately from your personal devices in
your home area network. For this purpose, cur‐
rent Wi-Fi routers offer the possibility of setting
up a separate network, e.g. a Wi-Fi for IoT devi‐
ces or a wireless network for guests. This sepa‐
rate Wi-Fi network does not provide access to
personal data or devices.
®
app:
®
app:
0458-036-9801-A
Werbung
