Werbung
5 Using the robotic mower in a team
► Insert guide wires (3 and 4) of the docking sta‐
tions (team 2 and team 3) into the charging
cable opening (5) and feed through the guide
wires.
Push the guide wires upward inside the dock‐
ing station.
► Using the appropriate cable markers, mark the
guide wires near the housing.
Marking will facilitate the subsequent connec‐
tion to the correct terminal.
7
► Insert the plug (6) into the opening (5) and
feed through the charging cable (7).
Push the charging cable (7) upward inside the
docking station.
5.5
Installing the Perimeter Wire
5.5.1
Installing the perimeter wire
Installing the perimeter wire to the guide wires
The master docking station (team 1) serves as
the starting point for installing the perimeter wire.
The perimeter wire is installed clockwise.
2
► Insert the beginning of the wire (1) into the
right conduit (2) and feed it through.
Push the perimeter wire (1) upward inside the
master docking station (team 1).
0458-036-9801-A
5
6
1
1
1
► Feed the perimeter wire (1) through until it pro‐
trudes upward for a length of a = 37 cm
®
(length: 1x iMOW
► Use a cable marker (3) to mark the beginning
of the wire (1) near the housing.
Marking will facilitate the subsequent connec‐
tion to the correct terminal.
4
► Install the perimeter wire (1) in the base
plate (4) so that the guide wire lies flat in the
cable duct and is secured by the hook.
► Use a fixing pin (5) to attach the perimeter
wire (1) directly to the base plate (4) of the
master docking station.
1
4
► Install the perimeter wire (1) so that the follow‐
ing conditions are met:
– The perimeter wire (1) is fed from the base
plate (4) to the side and installed along the
navigable area with a distance of 37 cm
(length: 1x iMOW
– The perimeter wire away is fed from the
base plate (4) to the side and installed along
the navigable area.
English
37 cm (14.5 in.)
27,5 cm (10.75 in.)
15 cm (6 in.)
3
Ruler).
5
1
4
®
Ruler) from obstacles.
1
81
Werbung
