Werbung
5 Using the robotic mower in a team
► Choose the power supply (2) location so that
the following conditions are met:
– The power supply (2) and the connecting
cable are outside of the mowing area.
– A suitable wall socket is within reach of the
power supply (2).
– The power supply (2) rests on a flat and not
permanently wet surface.
– The power supply (2) is installed elevated
above the ground in case it is exposed to
more protracted wet conditions.
– If possible, protect the location against
adverse weather conditions and direct sun‐
light.
► Route the charging cable so that the following
conditions are met:
– The charging cable (1) is outside of the
mowing area.
– The charging cable (1) is routed so that
people cannot trip over it.
– The charging cable (1) is not under tension
or tangled.
– The charging cable (1) is completely
unwound and is not under the docking sta‐
tion.
– The charging cable (1) is not on a perma‐
nently wet surface.
► Connect charging cable (1) with the plug (3) of
the power supply (2).
5
6
► Plug the mains plug (4) into a correctly instal‐
led socket (5).
The LED (6) on the master docking sta‐
tion (team 1) lights up green. The LEDs (7) on
the other docking stations flash red.
0458-036-9801-A
5.6.4
The power supply can be mounted on a wall.
► Mount the power supply so that the following
5.7
5.7.1
Resetting the robotic mowers
If a robotic mower has been previously used as
an individual device or in another team, all set‐
tings must be reset to the default settings via the
MY iMOW
Enter settings of the robotic mowers only after
4
completing the team set-up. Use the MY iMOW
app or the STIHL connected Portal.
Marking the robotic mowers and docking stations
as a team
7
► Use the supplied stickers to mark the robotic
Sequence from right to left:
– Master docking station (team 1)
– Docking station (team 2)
Mounting the power supply on a wall
a
conditions are met:
– Use suitable mounting materials.
– The power supply is level.
Following distances are complied with:
– The power supply is outside of the
range (a) of possible electrical installa‐
tions.
– A suitable socket is within reach of the
power supply.
– If possible, protect the location against
adverse weather conditions and direct sun‐
light.
Setting up the team
Preparing the team
®
app,
9.2.
mowers and corresponding docking stations.
English
®
85
Werbung
