Werbung
English
– Docking station (team 3)
Activating the device lock
In order to set up the team function, the device
lock of the robotic mower must be activated.
► Press STOP (1).
The robot mower is stopped and locked.
► Press and hold STOP (1) until the light
strip (2) fully lights up red.
► Press STOP (1).
The light strip (2) flashes twice. The device
lock of the robotic mower is activated.
Deactivating PIN protection
The PIN protection must be deactivated on the
robotic mower in order to set up the team func‐
tion.
► If a PIN protection is active, deactivate the PIN
protection in the MY iMOW
5.7.2
Setting up the team function
Setting up the team function must be carried out
individually and in descending order for each
robotic mower with associated docking station:
– Team 3
– Team 2
– Team 1
In order to set up the team function, the respec‐
tive robotic mower must first be placed in the
master docking station (team 1).
86
1
2
1
2
®
app.
5 Using the robotic mower in a team
Setting up team 3
► Push the robotic mower (team 3) into the mas‐
ter docking station (team 1) as far as it will go.
► Press and hold HOME (1) until the light
strip (2) completely lights up yellow.
The team configuration is active, and the light
strip (2) lights up yellow from left to right.
► Remove the robotic mower (team 3) from the
master docking station and push it into the tar‐
get station (team 3) as far as it will go.
► Press HOME (1).
The target station is confirmed.
1
2
1
0458-036-9801-A
Werbung
