Hold On - Hold Off; Modification Of The Generation/Simulation Value - WIKA Pascal ET Betriebsanleitung

6. Commissioning, operation
The main screen now displays the active function by showing the text SCL on the blue bar. The measuring value with the
new unit is displayed with big numbers, and the actual measuring value is displayed with small numbers, close the indication
"Signal". The following screen shows two channels and the first one displays the active scaling function:
EN
Fig. 68 - Channel with active scaling function
6.5.3 Hold On – Hold Off
The [HOLD ON-HOLD OFF] button is used to freeze what displayed for the selected channel.
Press [HOLD ON] to hold the values: HOLD OFF will appear. Press it to unlock the channel. HOLD ON will appear again
HOLD on the display means that the values are hold. See below:
Fig. 69 - Channel with HOLD enabled

6.5.4 Modification of the generation/simulation value

The generated/simulated value of an output card or KEY can be modified from the main screen directly, by pressing the value:
Fig. 70 - Generation / simulation value modifying
WIKA operating instructions, model Pascal ET 55