Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Specifications
3. Specifications
3.1 Base instrument
EN
Base instrument
Indication
Display
Dimensions
Backlight
Electrical input and output
Number and type
Resistance thermometer (RTD)
Thermocouples
Voltage signal
Current signal
Frequency signal
Pulses signal
Resistance
Voltage supply
®
HART
communication
®
HART
module
Resistance
Loop current
Voltage supply
Pressure connection
Permissible media
Temperature compensation
Temperature coefficient
Units
Voltage supply
Battery type
Battery life (fully-charged)
Power supply
Permissible ambient conditions
Operating temperature
Storage temperature
Relative humidity
8
Touchscreen + 5 keys
640 x 480 Dots
Dot size: 0.06 x 0.06 mm (0.002 x 0.002 in)
LED
banana-plug inputs for electrical parameters, resistance thermometers and thermocouples
Pt100 (385, 3616, 3906, 3926, 3923), Pt200, Pt500, Pt1000 (385, 3916), Ni100, Ni120, Cu10,
Cu100
Types J, K, T, F, R, S, B, U, L, N, E, C
input: DC ±100 mV, ±2 V, ±80 V
output: DC 20 V
input: DC ±100 mA
output: DC 20 mA
0 ... 50,000 Hz
1 ... 999,999
0 ... 10,000 Ω
DC 24 V
®
based on HART
universal and common practice commands
®
HART
resistance 250 Ω (activatable)
max. DC 24 mA
DC 24 V
1/4" BSP (male) by PSP-1 external pressure sensor
non-corrosive gases and liquids
-10 ... +50 °C (14 ... 122 °F)
0.001 % of reading/°C, outside of 19 ... 23 °C (66 ... 73 °F)
bar, mbar, psi, psf, Pa, hPa, kPa, MPa, torr, atm, kg/cm², kg/m², mmHg (0 °C), cmHg (0 °C),
mHg (0 °C), inHg (0 °C), mmH
O (4 °C), cmH
2
ftH
O (4 °C)
2
rechargeable battery NiMH
8 hours for typical usage (without backlighting)
AC 100 ... 240 V, 50/60 Hz
-10 ... +50 °C (14 ... 122 °F)
-30 ... +80 °C (-22 ... +176 °F)
Operating humidity: 10 ... 90 % r. h. (non-condensing)
Storage humidity: 0 ... 90 % r. h. (non-condensing)
WIKA operating instructions, model Pascal ET
O (4 °C), mH
O (4 °C), inH
O (4 °C),
2
2
2
Werbung
Kapitel
Inhaltsverzeichnis
