Display Of The Instrument Satus Page For The Calibration; Channel Settings - WIKA Pascal ET Betriebsanleitung

6. Commissioning, operation

6.4.3.2 Display of the Instrument satus page for the calibration

The status page for the calibration can be displayed by pressing the button on the main screen:
EN
The following information are displayed:
Fig. 64 - Instrument status page display

6.5 Channel settings

By pressing the button [Chanel setting] the screen could be show the following parameters:
4
Fig. 65 - Channel setting screen
WIKA operating instructions, model Pascal ET 53