6. Commissioning, operation
By selecting the unit [mA] the following screen appears:
EN
Fig. 38 - Unit mA selected for module IN A
6.3.2.4 Temperature simulation
The procedure for the temperature simulation assignment is similar to the measurement one as described previously, except
for the step where the operator needs to select operative module by pressing the button indicated with
.
2
2
Fig. 39 - Selecting channel assignment OUT A - mA
The next step is the selection of one of the output modules OUT A or OUT B (if present):
Fig. 40 - Selecting generation module (OUT A or OUT B)
WIKA operating instructions, model Pascal ET
39