WIKA Pascal ET Betriebsanleitung Seite 62

6. Commissioning, operation
Example:
EN
Press [REPORT] and set it by using the command [SETUPBER]:
The following parameters have to be configured at first in order to create reports for thermocouples or resistance
thermometers:
Function
Dut Model
Dry Block type
Dry Block baudrate
62
Meaning
Set the type of thermometer by selecting [Thermocouple] or [RTD]. Do not leave the field as [not
defined] otherwise the Pascal report software will be not able to run the proper report type.
Select the dry-well calibrator connected to the Pascal calibrator.
Set the baud rate value that must be the same used by the dry-well calibrator.
WIKA operating instructions, model Pascal ET