Intended Use; Personnel Qualification - WIKA Pascal ET Betriebsanleitung

2. Safety

2.2 Intended use

WARNING!
Before installation, commissioning and operation, ensure that the appropriate reference pressure sensor has
EN
been selected in terms of measuring range, design and specific measuring conditions. Serious injuries and/or
damage can occur should these not be observed.
Further important safety instructions can be found in the individual chapters of these operating instructions.
The model Pascal ET hand-held multifunction calibrator gauge can be used as a calibration instrument and also for any
application which requires accuracy pressure measurement.
The instrument has been designed and built solely for the intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications requires the instrument to be taken out
of service immediately and inspected by an authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from humidity, impacts, strong magnetic
fields, static electricity and extreme temperatures, do not insert any objects into the instrument or its openings). Plugs and
sockets must be protected from contamination.
If the instrument is transported from a cold into a warm environment, the formation of condensation may result in the
instrument malfunctioning. Before putting it back into operation, wait for the instrument temperature and the room temperature
to equalize.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.

2.3 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to equipment.
▶ The activities described in these operating instructions may only be carried out by skilled personnel who have
the qualifications described below.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work described and independently recognising potential
hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive media.
6 WIKA operating instructions, model Pascal ET