WIKA Pascal ET Betriebsanleitung Seite 36

6. Commissioning, operation
The main screen changes as follows:
EN
The calibrator is now set on the "IN A" module, and it select the last used unit for this module (in this case the last used unit
was "mV").
Press the button indicated with
Press the button [TC] and the main screen changes as follows:
36
3
Fig. 30 - "IN A" Selected
to change the unit from "mV" to "Tc" and the following screen appears:
3
Fig. 31 - Selecting the unit "Tc" for the module "IN A"
8
Fig. 32 - Module "IN A" with unit [Tc] selected
WIKA operating instructions, model Pascal ET