N) Selection Of The Model Memory - Reely MISSION Bedienungsanleitung

n) Selection of the model memory

Your remote control system provides a total of ten different model memories in which you can store the individual
settings for ten different models. Alternatively, you can also set different values for one model and then save them
separately.
Activating a model memory
• Switch on the transmitter. On the transmitter's LC display the operating display
will appear.
• Press the SEL button (see ill. 1, pos. 3) 13 times to access the menu for
selecting the model memory.
• Besides the menu "SEL", the display also shows the currently activated
memory.
• With the CH button (see ill. 1, pos. 5), you can now select the model memories
01 ...10 individually. With each press of the button, the display switches one
memory slot further.
• Once the desired memory slot is reached, press plus and minus
simultaneously (see ill. 1, pos. 4) for at least one second.
The remote control sensor issues a signal and the display shows „OK".
Afterwards, the display shows the newly activated model memory slot.
Figure 51
101