Reely MISSION Bedienungsanleitung Seite 167

Setting the EPA value for channel 3
• Switch on the transmitter. On the transmitter's LC display the operating display
will appear.
• Press the SEL button (see ill. 1, pos. 3) once and then the CH button (see ill.
1, pos. 5) twice to access the menu for setting the additional servo.
• Besides the menu "EPA-3C", the display also shows the running direction
arrow left and the default or last programmed value.
• With the plus and minus buttons (see illustration 1, pos. 4) you can now set
the desired servo deflection for the left turn. The adjustable value is between
0% and 120%.
• Then press the CH button again (see ill. 1, pos. 5). The running direction
arrow changes from the left to the right and the default or last programmed
value is displayed on the top.
• With the plus and minus buttons (see illustration 1, pos. 4) you can now set
the desired steering value for the right turn.
Please note that you can first control the EPA setting on the additional servo once you have performed
the programming steps in the chapter „Setting the path for the additional servo on channel 3".
Figure 27
85