Reely MISSION Bedienungsanleitung Seite 166

Setting the EPA value for the throttle servo
• Switch on the transmitter. On the transmitter's LC display the operating display
will appear.
• Press the SEL button (see ill. 1, pos. 3) once and then the CH button (see ill.
1, pos. 5) to access the menu for setting the throttle servo.
• Pull the operating lever for the drive function (see ill. 1, pos. 7) all the way to
the back towards the transmission handle and keep it in this position.
Besides the menu "EPA-TH", the display also shows the running direction
arrow forwards left and the default or last programmed value.
• With the plus and minus buttons (see illustration 1, pos. 4) you can now set
the desired servo value for full throttle. The adjustable value is between 0%
and 120%.
• Now press the operating lever for the drive function forwards and keep it in
this position.
The running direction arrow changes from forwards to backwards and the
default or last programmed values is displayed on the top.
• With the plus and minus buttons (see illustration 1, pos. 4) you can now set
the desired servo value for braking.
84
Figure 26