Description Of The Model - Reely MAMMOTH PRO RTR Bedienungsanleitung

2 D
ESCRIPTION OF THE MODEL
D
O YOU WANT EVERYTHING AND IMMEDIATELY
You made the correct choice with Monster Truck MAMMOTH Pro RtR. The engine is already mounted, as well as the com-
plete RC system with servos and receiver. For the receiver and the rechargeable batteries of the receiver, there is a practi-
cal box screwed onto the chassis.
A finished car body and a matching decal sheet are included in the delivery; the car body support is also mounted.
However, you still have to charge rechargeable batteries or to insert batteries, to fasten the spark plug, to fill the tank and
to install the car body. Now, you are ready!
Highest quality materials and first-grade workmanship guarantee untroubled driving fun even under tough operating conditi-
ons and a long life of the model.
The low degree of maintenance leaves you lots of time to concentrate on driving and to perfect your manner of driving.
High Tech for Pros
The upper deck, double transverse control arms, oil-dampened shock absorbers, wheel suspension and reinforcing cross-
ties made of anodised aluminium with chamfered edges offer not only a great look, but also ensure maximum stability at low
weight.This also applies to the carbon steering link.
The new slide carburettor made of aluminium and plastics will convince you with its easy set-up and allows for a perfect engine
calibration. The slide carburettor of a new type made of aluminum and plastic is easily adjustable, hence allowing for a perfect
engine calibration, the automatic, adjustable two-speed transmission ensures an ideal balancing of operations.
Perfect Off-Road Action!
Are you looking for a challenge? Do you want to be able to use your model in every terrain?
The set-up possibilities of this type of vehicle are as versatile as the terrain you can access with it.Adjust the undercarriage
to your driving style and needs by setting the suspension, the camber of the front and rear axle as well as the wheel
alignment. An underride protection made of aluminium and the spring travel limit of the shock absorbers prevents the
main pinion, which protrudes from the chassis, from touching the ground.
The front rammer made of anodised aluminium, which is large and reaches far up, is supported by two angled plastics
cross-ties on the front differential housing.In case of a frontal crash, these cross-ties will absorb the shock, so the model is
protected in the best possible way. The adjustable servo saver protects the steering servo from damage.
CVD (Constant Velocity Drive) cardan shafts ensure safe propulsion with low wear even at a maximum steering
angle.Silicone sleeves prevent dust from entering. The receivers and the rechargeable receiver batteries in the RC box on
the chassis are also protected from dust.
The large double aluminium oil-dampened absorbers help you to simply "straighten out" ground unevenness.With a ground
clearance of 87.5 mm, hardly anything can stop the MAMMOTH Pro in the terrain.
T
ECHNICAL INFORMATION
Engine:
Monster Truck MAMMOTH Pro is driven by an air-cooled 4,58 ccm two stroke engine with 2.15 kW (2,92 HP).
Slide carburettor, manifold and resonance tube are already mounted.
The engine is operated with environmentally-friendly model fuel based on oil/methanol, the tank with snap closing holds
125 ccm..
Drive:
The drive power of the 4.58 cc two-stroke engine is transmitted to one enclosed differential in both the front and rear axle
via the main pinions of the adjustable automatic two-speed transmission with a centrifugal clutch and two cardan shafts.
From there it is transmitted to the wheels via CVD cardan shafts.
The clutch bell has two ventilation slots for an improved cooling.
All differentials have metal bevel wheels and planet wheels, the axle drive shafts are supported by ball bearings.
Undercarriage:
Both the independent suspension with alignment and inclination setting (front) and the double aluminium oil-
dampened shock absorbers with a spring travel limit, which can be adjusted by modifying the spring preload with the
help of knurled nuts, allow for ideal road holding in all situations.
The wheel alignment can be roughly adjusted by changing the fixing points in the carbon centre part of the steering
links.Fine-tuning of wheel alignment and inclination is carried out with the help of the clamping screws in the upper
transverse links and the outer steering links. The clamping screws for setting the inclination are screwed in between two
aluminium plates and are fixed in the desired position with the help of socket screws.
The vehicle brakes with a very effective triple brake disc system with punched aluminium brake discs. A double disc brake
acts on the front axle and another disc brake on the rear axle.
The semi-air wheels with a special multi-spike profile and insertion strips offer grip on every surface.The disc rims are
stable and aerodynamical.
Chassis:
The bottom support plate made of aluminium with cranked edges and the two reinforcing cross-ties from the
differential housings to the upper deck ensure high stability and flexural rigidity at low weight.This rigidity leads to a good
driving stability, since the chassis adjustment is not superposed by suspension torques from the chassis.
This rigidity leads to a good driving stability, since the chassis adjustment is not superposed by suspension torques from the
chassis.
34
?
Operating Instructions 4WD Monster Truck Chassis Item No. 23 32 35