Programming Options In The Setup Menu; A) Overview Of The Available Menu Points - Reely MISSION Bedienungsanleitung



13. Programming options in the setup menu

• To access the setup menu, keep the SEL button (see ill. 1, pos. 3) depressed
and turn the remote control system on with the function switch (see ill. 1, pos.
13).
• As soon as the remote control emits a signal, let go of the SEL button right
away. Now the display shows the basic display for the setup menu.

a) Overview of the available menu points

The next page gives an overview of the possible menu points (ill. 16).
With the SEL button (see ill 1, pos. 3) you can select the individual menu points of the endless loop and call up further
submenus using the CH button (see ill. 1, pos. 5) or make the necessary changes in connection with the (+) and (-)
setup buttons (see ill. 1, pos. 4).
The new values are saved automatically if no further changes are made.
If there is no input for 15 seconds, the LC display jumps back to the basic display.
To leave the setup menu, you have to turn the remote control system off and then on again.
Warning!
After making your setting, wait at least another 2 – 3 seconds before turning the transmitter off. Otherwise,
the changed value is not saved correctly.
74
Figure 15