G) Display Of The Drive Status; H) Setting The Led Brightness; Programming Options In The Function Menu; A) Overview Of The Available Menu Points - Reely MISSION Bedienungsanleitung

g) Display of the drive status

• Call up the setup menu and press the SEL button (see ill. 1, pos. 3) six times
to access the drive status display menu.
• The transmitter software offers you the option to switch to a second drive
condition with the help of the plus and minus buttons (see ill 1, pos. 4) with
different setup options; however, the transmitter hardware is not designed
for this purpose.
For this reason, we recommend keeping this function turned
off.

h) Setting the LED brightness

• Call up the setup menu and press the SEL button (see ill. 1, pos. 3) seven
times to access the setup menu for the LED brightness.
• The present brightness level is indicated on the top of the display. With the
help of the plus and minus buttons (see ill. 1, pos. 4), you can change the
desired function from L-1 (weak) to L-4 (bright). In the setting L-0, the LED is
off.


14. Programming options in the function menu

The function menu offers possibilities to make the most varied changes on your model. This enables you to optimally
adjust the remote control sensor to your model and significantly increase the driving capacity of your model thanks to
the useful software functions.

a) Overview of the available menu points

After turning on the transmitter, you can select the individual menu points of the endless loop with the SEL button (see
ill 1, pos. 3) and call up further submenus using the CH button (see ill. 1, pos. 5) or make the necessary changes in
connection with the (+) and (-) setup buttons (see ill. 1, pos. 4). The new values are saved automatically if no further
changes are made.
Observe ill. 24 on the following double-page.
Figure 22
Figure 23
79