Description Of The Model; Technical Information - Reely RAMBO Racing 7.5 RTR Bedienungsanleitung

3.

Description of the model

Do you want everything and immediately?
You made the correct choice with 4WD Buggy „RAMBO" RtR. The engine with manifold and resonance tube is already mounted, as well as the com-
plete RC system with servos and receiver with ON/OFF switch. We provided a practical box on the chassis for the receiver and the batteries of the
receiver.A finished car body and a matching decal sheet are included in the delivery; the car body support is also mounted.
However, you still have to charge rechargeable batteries or to insert batteries, to fasten the spark plug, to fill the tank and
to install the car body. Now, you are ready!
Highest quality materials and first-grade workmanship guarantee untroubled driving fun even under tough operating conditions and a long life of the
model.
The low degree of maintenance leaves you lots of time to concentrate on driving and to perfect your manner of driving.
The Total Off-Road Experience!
You're looking for a challenge and want to take your model over any terrain. Just as diverse as the terrain that you can tackle with this vehicle, so are
the options to adjust the running gear to your driving style and your range of use. Plastic under-chassis protection provides an impact shield for the
main gear extending through the floor panel. A generously dimensioned bumper rams hindrances out of the way. The reinforced steering mountings
provide exceptional stability. Nobbly tires ensure the right traction even in heavy terrain.

Technical Information

Engine:
4WD Buggy RAMBO Racing 7.5 is driven by an air-cooled 7,54 ccm two stroke engine with ,4 kW (3,3 PS). Slide carburettor, manifold and reso-
nance tube are already mounted.
The slide carburettor of a new type made of aluminum and plastic is easily adjustable, hence allowing for a perfect engine calibration.
The recoil starter cord that is flanged onto the crank case makes it possible to start the engine without other tools.
The engine is operated with environmentally-friendly model fuel based on oil/methanol, the tank with snap closing and integrated tank pump holds 15
ccm.
Drive:
The driving power of the two stroke engine is transmitted to the differential in the front and rear axle via the main pinions of the adjustable automatic
two-speed transmission with a centrifugal clutch and two cardan shafts. From there it is transmitted to the front and rear wheels via cardan shafts. The
two-speed drive has metal cogwheels.
The clutch bell of the centrifugal clutch with aluminium clutch cheeks has to ventilation slots for improved cooling.
All differentials have metal bevel wheels and planet wheels, the axle drive shafts are supported by ball bearings.
Chassis frame:
The independent wheel suspension at the double transverse control arms as well as the aluminium oil dampened shock absorbers with modifiable
attack angle which are adjustable with spring pretensionners in the spring preload, optimise road-holding, thus fulfilling all expectations
The vehicle braking is provided by a very effective double disk braking system with perforated aluminium brake disks. One disk brake slows the rear
axle while the other provides braking to the front axle drive.
The adjustable servo saver protects the steering servo in hard terrains.
A transverse stabilizer at the rear axle reduces the inclination of the model to understeer, which makes driving behavior more agile.
Chassis:
The ground support plate made of Duralumin and the reinforcing cross-ties of front axle and of rear axle differential to the chassis guarantee a high
stability with small weight.
This stiffness ensures a good driving stability, since no suspension torque from the chassis is superposed to the selected tuning of the undercarriage.
The drive performance benefits from the low net weight of the special aluminum alloy and the high stability of the model means that it can withstand
small collisions without damage.
Tuning the Running Gear
Setting the wheel camber on the front and rear axle and adjusting the wheel alignment allow you to change the drive characteristics of the vehicle.
With the generously sized adjustable aluminium oil shock absorbers, you can simply "iron out" any uneven terrain.
Tuning parts are available on request. Hence, you can retrofit at any time according to your wishes.
38
Operating Instructions 4WD GP BUGGY RAMBO RACING 7,54 RtR No. 3 51 85