Reely MISSION Bedienungsanleitung Seite 165

Setting the EPA value for the steering servo
• Switch on the transmitter. On the transmitter's LC display the operating display
will appear.
• Press the SEL button (see ill. 1, pos. 3) nine times to access the menu for
setting the steering servo.
• Turn the steering wheel (see ill. 1, pos. 6) all the way to the left and keep it in
this position. Besides the menu "EPA-ST", the display also shows the running
direction arrow to the left and the default or last programmed value.
• With the plus and minus buttons (see illustration 1, pos. 4) you can now set
the desired value for the left turn. The adjustable value is between 0% and
120%.
• Now turn the steering wheel for the steering function to the right and keep it
in this position. The running direction arrow changes from the left to the right
and the default or last programmed values is displayed on the top.
• With the plus and minus buttons (see illustration 1, pos. 4) you can now set
the desired value for the right turn.
Figure 25
83