Escription Of The Model; Technical Information - Reely HOTLANDER NEXT GENERATION Bedienungsanleitung

3 D

EscRIpTION Of THE MODEL

D ?
O yOu WANT EvERyTHING AND IMMEDIATELy
You made the correct choice with Monster Truck HOTLANDER NEXT GENERATION. The engine with starter cord, air filter, manifold and resonance
tube is already mounted, as well as the complete RC system with servos and receiver with ON/OFF switch (HOTLANDER NEXT GENERATION RTR).
For the receiver and the rechargeable batteries of the receiver, there is a practical box screwed onto the chassis.
A finished car body is included in the delivery; the car body support is also mounted.
However, you still have to charge rechargeable batteries or to insert batteries, to fasten the glow plug, to fill the tank and
to install the car body. Now, you are ready!
Highest quality materials and first-grade workmanship guarantee untroubled driving fun even under tough operating conditions and a long life of the
model.
The low degree of maintenance leaves you lots of time to concentrate on driving and to perfect your manner of driving.
T
EcHNIcAL INfORMATION
Engine:
Monster Truck HOTLANDER NEXT GENERATION is driven by an air-cooled ,76 ccm two stroke engine with 1.5 kW (1,7 HP).
Slide carburettor, manifold and resonance tube are already mounted.
The slide carburettor of a new type made of aluminum and plastic is easily adjustable, hence allowing for a perfect engine calibration.
The recoil starter cord that is flanged onto the crank case makes it possible to start the engine without other tools.
The engine is operated with environmentally-friendly model fuel based on oil/methanol, the tank with snap closing and integrated tank pump holds 100
ccm.
Drive:
The driving power of the 1,7 PS two stroke engine is transmitted to the differential in the rear axle.
The differential has metal bevel wheels and planet wheels, the axle drive shafts are supported by ball bearings.
Chassis frame:
The mono-wheel suspension on the double transverse control arms as well as the aluminium oil pressure shock absorbers on aluminium damper
plates adjustable with screw rings allow for an optimization of the road holding for all demands.
An adjustable disk brake with a steel brake disk allows for a braking power adaptable to the driving style and the terrain.
The servo saver protects the steering servo in difficult terrain.
With a ground clearance of 55 mm, hardly anything can stop the HOTLANDER NEXT GENERATION in the terrain.
Chassis
The bottom support plate made of aluminium and the RC mounting plate of the double-deck chassis ensure a high stability with small weight.
Tuning
Clamping screws in the upper transverse control arms are used to adjust the camber inclination of the front and rear axles,
the alignment is also effected via clamping screws as well as by resetting the steering links in other linkage points.
With the tunable aluminum oil dampened suspensions you simply "straighten out" ground unevenness.
34
Operating Instructions WD Monster Truck HOTLANDER NEXT GENERATION Item No. 3 49 65 / 3 49 67