Actim 1ngeni Bedienungsanleitung Seite 47

Information Dialog
No user ID list found!
0260
Please check USB key and try again.
No user ID list found on instrument!
0261
Please enter users.
Test types imported successfully!
0262
Instrument shall reboot.
0264 Calibration completed successfully!
0265 Normalisation completed successfully!
Factory default settings restored
0266
successfully! Device shall reboot.
Report has been successfully sent to
0268
printer: {0}
The current operation was cancelled
0269 successfully!
Press OK to continue.
0270 Exported successfully to USB instrument!
No test results found in instrument
0272
memory!
0273 Image: {0} acquired successfully!
0276 Result deletion completed successfully!
0277 Changes made were saved.
0278 User ID successfully changed!
0279 Password changed successfully!
No results found containing {0}!
0280
Please enter different search term.
Instrument time has not been set!
0281
Please set the instrument time.
User default settings restored successfully!
0288
Device shall reboot
0289 New user created successfully.
If the user is attempting to import a user list and the
instrument cannot find the user list on the attached USB
key then the user should check the USB key contacts to
ensure that the file is in the correct location and in the
correct format.
If there are no user ID entered on the instrument, the in-
strument shall inform the user. The admin user should add
users to the instrument then reattempt request.
The instrument has successfully imported Test Types. The
instrument informs the user that an instrument reboot
is required prior to testing with the newly imported Test
Types.
Calibration attempt on Actim 1ngeni instrument has been
completed successfully.
Normali sation attempt on Actim 1ngeni instrument has
been completed successfully.
On the factory default settings have been successfully
applied then the instrument must reboot.
A dialog to inform the user that the instrument successfully
sent the report to the printer. If the report does not print,
the issue is most likely to be with the printer.
If the user cancels an operation, this dialog informs the user
that the operation was successfully cancelled.
The instrument successfully exported to an attached USB
flash memory drive.
An attempt was made to export test results when the
memory was empty. Run a test and retry the export
function.
The instrument has successfully acquired an image and
saved it to the attached USB key.
Results deletion function has completed successfully. All
results have been deleted.
Changes made were saved successfully.
User ID was successfully changed.
Admin password wad successfully changed.
If the text in the search field entered by a user in the Test
Results search function return no results then an informa-
tion dialog box informs the user.
Attempt to reset time.
Upon successful restoration of the user default settings,
the instrument must reboot.
New user was successfully created.
Troubleshooting
47