Actim 1ngeni Bedienungsanleitung Seite 20

Admin user settings
20
• Send All Unsent
The 'Send All Unsent' option performs an immediate transmission of all unsent test results to the LIS.
Refer to Section 1.4.4 Toolbar Indicators, to understand the Transmission Status shown by the Actim 1ngeni
Instrument.
When sending the results, the unsent result count will count down to 0 as each previously unsent result is sent to
the LIS server.
During transmission of the results, a stop button (X) will appear on the bottom right corner of the screen. This
will allow the use to stop the current transmission and leave the remaining results as unsent.
Auto Sending
The user can set the Actim 1ngeni Instrument to automatically send results to the LIS Server at regular periods.
When the period elapses, all of the unsent results will be sent to the LIS Server.
Auto send can be configured by selecting on the "Auto Send" option from the Data
Connectivity menu within the Admin Settings.
Home > Admin Settings > Data Connectivity > Auto Send.
Toggle the Auto Send ON / OFF button , to enable the Auto Send Period
Adjust the Auto Send period by using the Up/Down arrows.
The available periods are:
• 5 Minutes
• 15 Minutes
• 30 Minutes
• 1 Hour
• 1 Day
Press the OK icon to confirm the applied settings.
Clear Sent Status
The user can clear the sent status of the number of transmissions sent to the LIS Server.
This may be useful if the user exports all test results off the instrument and clears
the memory and wishes to track one for one any new test results.